NOTE: This product has been discontinued. Please use Cooper's Flush-it as the recommended alternative. Flush-it is more effective and dries immediately allowing you to re-apply Moisturise-it afterwards - so you get the job done easier and faster!
Coopers Restoration System Clean-it is designed especially to clean timber surfaces finished with Moisturise-it and Moisturise-it Plus. Heavy traffic timber surfaces such as floors, bench tops, tables, front doors and window sills may get dirt build up that needs a deep clean.
Clean-it releases dirt trapped in the moisturised protection and this easily wipes away into a cloth. Stubborn dirt will shift with a light spray of Clean-it and the nylon detail brush or a Maintenance Pad (see below).
Clean-it is especially good for Moisturised floors in place of floor cleaners which may bleach or stain timber.
Once the woodwork dries check again for the return of the rich timber colour. If the woodwork is a little lack lustre, reapply a small amount of Moisturise-it Plus to revive the wood to its original glory.
Application
Clean-it is normally sprayed directly onto the wood surface without dilution. Spray applicators are supplied separately (see below).
